This is a personal note to me.
If you need to automate keyboard layout during mass deployment:
- Create application with attached keyboard.7z
- Add application installation step in task sequence.
Month: November 2013
Rittal DK 7200.221 serial cable pinout
In my work I have Rittal CMC-TC device to play with. Unfortunately it has unusual serial port. After half day googling with my colleagues we managed to find damn pin-out.
P.S.
This device is linux based and it is full with funny things.
Allied Telesis crash course
Allied Telesis
1. Password recovery procedure:
|
1 2 3 4 |
<i>* Connect to the router using a RS-232 cable</i> * Connect to the router via HyperTerminal. Settings for HyperTerminal = 9600 - 8 - None - 1 Flow Control = None * Power cycle the router and right away press the s key continuously until you see the login prompt > * User:manager; Password:friend |
2. Disable security mode:
|
1 |
<i>disable system security_mode</i> |
3. Set IP Address:
|
1 2 3 4 |
<i>enable ip</i> add ip interface=vlan1 ipaddress=192.168.1.1 mask=255.255.255.0 # To change Address set ip interface=interface ipaddress=ipadd mask=ipadd |
4. Enable GUI
|
1 2 3 |
<i>set gui=d9924e22.rsc</i> enable gui show http server |
5. Usefull commands
|
1 2 3 |
<i>show install</i> show file show sys |
6. Update firmware
|
1 2 3 |
<i>set loader method=tftp server=10.40.1.118 destination=flash</i> load file=89276-02.rez show load |